Visit our COVID-19 Resources Page  Learn More

Electrical Inspections

Welcome

Effective July 1, 2018, the Warren County Division for Building and Electrical Services (BES) is no longer subcontracting electrical inspections through GREIS. All new permit electrical inspections will be provided through BES.

Apply for Electrical Inspections Online


Apply Via Online Portal

Note: all electrical permits and inspection requests must be applied for online via our online portal.

Permits must be applied for at least 24 hours before the desired day of inspection.

Some permits are required to pay the fee before requesting an inspection including "Electrical -- Reconnect" and "Electrical -- Solar."

Electrical Inspection Fee Schedule

Effective July 1, 2018
Click to download.

THE FOLLOWING ELECTRICAL INSPECTION FEES INCLUDE A ROUGH-IN AND FINAL INSPECTION ON CONCEALED WIRING INSTALLATIONS. FEES ARE LISTED IN ACCORDANCE WITH SERVICE ENTRANCE CAPACITY AND INCLUDE BRANCH CIRCUITS, IF APPLICABLE:

Residential

Minimum Charge $100

LIVING SPACE INCLUDING GARAGE UNDER 2,000 SQ FT
$100.00
LIVING SPACE INCLUDING GARAGE OVER 2,000 SQ FT
5¢ PER SQ FT
UNFINISHED BASEMENTS
2.5¢ PER SQ FT

Single Phase Small Commercial

UP TO 150 AMP
$100.00
200 - 400 AMP
$125.00

Other

GARAGE, SHOP, BARN AND POOLS
$100.00
SOLAR SERVICES <10kw (AN ADDITIONAL $25 PER 5kw FOR SERVICES OVER 10kw)
$100.00
VISUAL SAFETY FOR RECONNECT
$100.00

Residential

Minimum Charge $100

MANUFACTURED HOMES
$50.00
SERVICE/METER POLES
$50.00
SERVICE ENTRANCE CONVERSION W/ NO ADDITIONAL WIRING
$50.00
TEMPORARY POLES
$50.00
SERVICE ONLY
$50.00

Reinspection Fee $45.00

AFTER A JOB IS REPORTED COMPLETE AND INSPECTOR IS UNABLE TO MAKE THE INSPECTION, THROUGH NO FAULT OF THE INSPECTOR, A REINSPECTION FEE WILL BE CHARGED.

Three Phase Small Commercial and Industrial

60 – 120 AMP
$100.00
150 – 225 AMP
$120.00
250 – 400 AMP
$150.00

Three Phase Small Commercial and Industrial

TWO (2) PERCENT OF ELECTRICAL CONTRACT INCLUDING LABOR & MATERIALS¹* FOR THE FIRST $100,000 & REMAINING AMOUNT AT ONE (1) PERCENT, OR $0.25 PER AMP ON MAIN SERVICE, WHICHEVER IS GREATER.

¹*MATERIAL COSTS FOR CALCULATING INSPECTION FEE SHALL INCLUDE: SWITH GEAR, SUB-PANEL, BOXES, FITTINGS, CONDUIT, WIRE, LIGHTING FIXTURES, MOTOR CONTROLS, ETC. (ITEMS NOT NECESSARY: MOTORS, BOILERS, AIR CONDITIONERS OR CHILLERS, COMPUTERS, PRODUCTION MACHINERY AND LIKE EQUIPMENT.